材質說明

(節錄自JIS G 3505) 

 

                                                                      上一頁                回到產品主目錄           下一頁

Low Carbon Steel Wire Rods

  1. Scope

This Japanese Industrial Standard specifies low carbon steel wire rods , hereinafter referred to as the "wire rods" , to be uses for the manufacture of iron wire, galvanized iron wire for armouring, galvanized iron wire strand, etc.

However, wire rod for core wire of covered electrode is excluded from the application of this standard.

 

  1. Classification and Symbol

The wire rods shall be classified into SWRM 6  clasees, and their symbols shall conform to Table 1.

 

  1. Chemical Composition

The chemical composition of the wire rods shall be determined by the ladle analysis, and the values obtained shall conform to Table 1.

 

一.材質

 Chemical Composition%

Class symbol

C

Mn

P

S

SWRM 6

0.08 max.

0.60 max.

0.045 max.

0.045 max.

二.規格 

ψ4.2 mm & ψ 5.0mm

三.抗拉強度在50∼60kg/mm2

四.每捲350kg

五.逆時針捲料

 

                                                                      上一頁                回到產品主目錄           下一頁